Manufacturer: Artifice Armory
Material- PETG UV Resistant Polymer
Compatible with Beofeng UV5R, UV5X3 and BF-F8HP Radios
*Lanyard cord not included*
Do you bump your volume dial while operating operationally? Then you're going to need one of these.
Our UV5R dial lock is built to be tougher than the radio and purpose designed to be 3D printed, our locks use the least material needed to create the strongest part required for the job. That means shaving those grams off your gear without sacrificing our signature look for all your Instagram gear posts.
Manual of Use:
To employ the lock simply turn your UV5R's volume dial to your desired position and then align the lock so that the tail is in line with the audio jacks on the side of the radio and press the lock down onto the volume knob.
To remove the lock apply upwards pressure on either the lanyard loop or the base of the tail rocking the lock off of the volume knob.
DO NOT pull from the top of the lock or you will remove the volume knob along with the lock, if this does occur just realign the slot in the base of the volume knob with the post and press the knob back into place.